DLV Diamond Cabinet DZ, Руководство пользователя, Страница: 13 / 53

Diamond Cabinet_DZ_ Users Manual 1.0.doc0
13
4.3 Power up
Before start, check line voltage and grounding. The machine is designed to operate at
100~120V/200~240V, 50-60Hz.
AC power outlet to which the machine is connected should be easily accessible in case of
emergency.
4.4 Safety precautions
This section is designed to avoid damage to the machine and to minimize damage and protect
maintenance personnel and users from electric shock.
ATTENTION:
The following service instructions are to be used by qualified or trained personnel only.
The appliance is not to be used by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they are supervised or instructed,
and children are prevented from playing with the appliance.
4.4.1 Static-sensitive parts
The machine contains static-sensitive components which could be damaged by electric
discharges. Prior maintenance of the machine’s internal components, always touch ground straps
inside the machine to neutralize electric charges.
4.4.2 Power off
In case of emergency, power off the machine!
The machine will be completely powered off only when AC plug is removed from the outlet.
If the machine is connected to an uninterruptible power supply, be sure to switch it off.
WARNING: Unplugging the machine with wet hands or in wet environment may cause
electric shock.
4.4.3 Cabinet ventilation
Do not block or insert any objects into ventilation holes. This may cause the machine to overheat
or result in risk of fire or electric shock.
Secure proper space between machine and other objects to allow for normal ventilation
conditions.
4.4.4 Liquid
Avoid spilling on the machine any kind of liquids . Never clean the machine with a water jet .
This may result in risk of fire or electric shock. In case of accident, unplug the machine
immediately and contact qualified technical staff.
4.4.5 Avoid damages to the wires
Damaged power cord can result in risk of fire or short circuit. If the power cord is damaged, it
must be replaced with a special cord provided by the manufacturer or its agent.
4.4.6 Uncommon behavior
If there are unusual sounds, lights or smells coming out of the machine, power off the machine
completely and contact qualified technical staff. Failure to do so may result in risk of fire.