Installation of Gothia1 tweeter:
Recessed mounting 1:
You need a hole with a diameter of 46 mm / 1,88" in the door
side, fasten with four screws. A strong baffle will improve the
sound.
Recessed mounting 2:
Sometimes it´s necessary to install the tweeter at places where
you cant use the round flange. The flange (A) is possible to
remove from the tweeter driver (B) by turning it CCW.
If you prefer to install the tweeter with the flange attached to the
tweeter driver, we recommend you to add a string of strong glue
on the bottom side, between flange and chamber, to secure it.
This gives you the best sound reproduction in this installation.
It is very important that the baffle is stable, but it is just as important
that it is shaped in a way that allows the driver to ”breath”
backwards, otherwise there will be a lack in the drivers bass
reproduction.
Installation of 6,5” driver in baffles:
Wrong way
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
Bad air flow
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
Correct way
with chamfer-
ed edges
Max 5 mm
Free air flow
Correct way
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
Installation of Gothia3 midrange:
Recessed mounting:
You need a hole with a diameter of 95 mm / 3,74" in the door side
or dash board, fasten with the four screws. A strong baffle will
improve the sound. You should use the steel mounting rings
coming with the speakers to improve the installation.
B
A
