This product must be returned to the separate collection system for electronic
products. Do not dispose this product together with general household waste.
Marking by the ”CE” symbol indicates compliance of this device with the EMC
(Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of
the European Community
Introduction!
Please read this manual fully before unpacking and installing the pro-
duct. It will help you to optimise the performance of your speakers.
Unpacking and maintenance
Your speaker should be treated with the same care you would treat a
piece of furniture. Use only a piece of soft cloth to clean the loudspea-
kers. After unpacking, we suggest you retain all packing material for
future transports.
Running-in period
The performance of the speaker will change subtly during the listening
period.
Please allow your new speakers to play about 20 hours of music at
normal listening level before doing any critical listening.
System
DLS Q-sub8 is an efficient, active subwoofer with a built-in 100 W ana-
logue power amplifier. The loudspeaker unit is a specially developed,
8”, long-stroke woofer with a powerful magnetic system.
DLS subwoofer is designed to interact with Hi-Fi equipment, surround
installations and multi-media systems. The subwoofer allows great free-
dom in placement. With the control you can adjust phase, crossover
frequency and level, which makes it easy to adjust for the acoustics in
your listening room.
Connecting power supply
The switch "Power" is the on/off switch for the subwoofer. Normal posi-
tion is AUTO ON which makes the subwoofer start with the rest of your
system, POWER LED glows green. After a period without input signal
the amplifier atomatically reverts to standby, POWER LED glows red.
The switch "OFF" position is used when the subwoofer should not be
used for some time.
CAUTION!
If you hear distortion when you increase the volume this is normally a
sign of overloading the subwoofer and you should immediately reduce
the level. We recommend that you use the volume control with care.
Service
Should your DLS loudspeaker system require service, or if you
have difficulty in achieving the fine performance of which your DLS
loudspeaker system is capable, consult the DLS dealer from whom
the system was purchased. Your dealer has the knowledge required
to provide expert advice and assistance. In case the DLS dealer is
unable to assist you, you are welcome to contact the DLS Technical
Department.
Warranty
This DLS loudspeaker is warranted to the original purchaser, against
factory defect in material or workmanship, for a period of one (1)
year from the date of original purchase. This warranty is valid only
in the country of purchase, to the original purchaser and is non-
transferable.
DLS loudspeakers are music listening devices and should be used for
listening purposes only
They must not be connected to any other equipment than amplifiers
within the specified power range.
DLS cannot be held responsible for damage or injuries caused by
improper use, or use in violation with the recommendations in this
leaflet.
IMPORTANT!
Before connecting electricity to the power supply, it is important that
the POWER switch is
OFF
and check that the AC switch 115V - 230 V
is set at correct voltage for your country
Connect the subwoofers input signals before you switch the POWER
switch to
AUTO ON
.
fig.1
DESCRIPTION OF SUBWOOFER AMPLIFIER
(fig 1)
LINE IN
RCA socket for line low level input
LINE OUT
RCA socket for connection of low LINE signals to other sources.
PHASE
Control for phase shifting the subwoofer sound
LOW PASS FREQUENCY
Control for adjusting the x-over frequency to the subwoofer.
LEVEL
Control for adjusting subwoofer level to system
POWER LED
Red for standby and Green for subwoofer active
HIGH LEVEL INPUT
For connection from amplifiers speaker outputs
POWER
Main power switch
POWER INPUT SOCKET
Power input socket with fuse holder
VOLTAGE SELECTOR SWITCH
To adjust amplifier for 115 or 230 Volt connection