SOURCE INTERCONNECT
Single High Level / Speaker Input
Fig.9 High Level / Speaker Level Input
1) To use speaker level inputs please connect the HLC harness to connector,
2) Connect the wires from the speaker output of the radio to the white and grey wires of the amplifier input wires using the color
codes in above drawing.
3) If you are using both High Level / Speaker Inputs, make sure the MODE Selector switch is in the
3CH position
White (Solid) = Left +
White / Black (Striped) = Left -
Grey (Solid) = Right +
Grey / Black (Striped) = Right -
