Copyright ©2018 Digital Light Innovations. All Rights Reserved.
PRECAUTIONS
5
DLi 1809A
Before handling, assembling or operating your development kit, please read the following
precautions thoroughly. DLP
®
systems contain electrostatic discharge (ESD) sensitive components.
Handle with care to prevent permanent damage. The system electronics are exposed and sensitive
to electrostatic discharge, rough handling and contact with external elements. Utilize ESD
procedures and equipment for proper grounding when handling kits to avoid electrostatic
discharge damage.
ESD precautions include but are not limited to the following list:
4
Discharge static electricity from your body before handling system
4
Turn off the system and any attached peripherals
4
Disconnect the system and any attached peripherals from AC power
4
Wear an anti-static wrist strap that is properly grounded
4
Work in clean, static-safe work areas
4
Handle components on static protective work surfaces
(i.e. anti-static discharge mats or bags)
4
Avoid touching pins and circuit boards
4
Store components in anti-static bags until ready to use
4
Transport system in anti-static packaging
CAUTION!
Contains parts and assemblies susceptible to damage by Electrostatic Discharge (ESD).
CAUTION!
To minimize the risk of fire or equipment damage, make sure that air is allowed to
circulate freely around the development kit when operating. Avoid touching components during
operation.
