DLP Texas Instruments vivitek DU8090Z, Руководство пользователя

Страница: 13 / 57

DU8090Z DLP Projector - User Manual
12
UM80900217EN02
Remote Control
On
Use the button to turn on the projector.
OFF
Use the button to turn off the projector.
FOCUS
Adjust the focus of the projected image.
ZOOM
Zoom in/out the projected image.
TEST PATTERN
Use the button to show the test pattern. Press this button again to switch to
the next pattern. Press the EXIT button to return to the projected image.
LENS SHIFT
Use the button to move the lens right or left.
ENTER
Use the button to select settings or confirm the changed settings.
MENU
Press the button to display or hide the OSD Menu.
EXIT
Press the button to return to the previous Menu or exit the OSD Menu.
AUTO PC
You can use this function to execute signal source auto synchronization
BLANK
Press the button to temporarily interrupt the projection.
STATUS
Show OSD MENU
– SERVICE.
VGA
Select VGA input source.
COMPONENT
Select Component input source.
ASPECT
Press the button to display aspect ratio options.
HDMI1
Select HDMI 1 input source.
HDMI2
Select HDMI 2 input source.
DVI
Select DVI input source.
3G-SDI
Select 3G-SDI input source.
DisplayPort ( Not available for this model)
HDBaseT
Select HDBaseT input source.
CLEAR
Erase the set ID number of the remote control; refer to the section
“Using
Control ID for Multi-
projector Application” on page 26.
FREEZE
Freeze the projected image or resume the projection.
ID SET
Set up ID number for remote control; refer to the section
“Using Control ID
for Multi-
projector Application” on page 26.
Wired Remote Jack
Connect to WIRED REMOTE terminal
on the projector