MEETUS-E400 Wireless Network System
www.meetns.com
02
1. Installation
Install the equipment away from Tuner if possible.
Don’t install the equipment on power amplifier.
Don’t lean when installing Rack.
Hereby guarantee our equipment in free A/S for 1 year from purchasing date. However if its trouble is caused
by consumer, or by natural disaster even though it is in free A/S period, its A/S charge should be requested.
Caution when installing Rack
Warranty Period
Caution
Keep using Power and Voltage to be indicated, otherwise there is the risk like electric shock, fire.
This equipment has limitation of power to supply from AC outlet, so use total power consumption not to exceed
power to be indicated. (This is caused by fire)
Take the space of 100mm from wall at least in case of installation this equipment and the interval for radiation with
other equipment. Carefully read each manual when installing at rack and take its interval according to manual. (It is
caused by fire)
In case of having a stroke of thunder, unplug power code and disconnect connected wire to be connected to equip-
ment like antenna wire, phone wire etc. (It is caused by electric shock)
Don’t block the ventilation of equipment. (Because of internal heat, it may be caused by fire)
Don’t turn equipment inside out and lay equipment on.
Don’t use at confined place where is not airy except exclusive rack and to push equipment in.
Don’t use equipment on rug or blanket.
Don’t put slopping and shaking place. (It is caused by injury when falling)
Be careful not to put children in front of cassette tape, disk.
Be careful not to play children with packing box and material. ( It is caused by injury)
Don’t close power code to heating equipment. (It is caused by melting the sheath of code or by fire, electric shock)
Unplug plug with holding surely, don’t hold power code when separating.
Unplug the plug after turn it off surely when moving.
Firstly Separate antenna wire, connection code and external code etc when moving.
Firstly Remove CD, Cassette tape and video cassette when moving.
Do clean after unplugging the plug. (It may be caused by electric shock)
Firmly unplug the power code for safety when not using for long time.
Speak to Custom Service or purchasing Agency for internal cleaning at one per 2~3 years. In case of having a lot of
dust, it may be caused by fire or not working. Specially, it will be very effective if you do it before coming rainy season.
Minimize Volume level before power on.
Use the AC outlet that has earth connection.
