DLoG ITC 7, Руководство пользователя

Страница: 85 / 94

Common mistakes in usage
DLoG ITC 7 User’s Manual 73
14. Common mistakes in usage
14.1. Power supply
•
Use only the AC power supply unit provided to connect the DLoG ITC 7 to the AC
power supply network.
14.2. Powering up/down
•
Please note that the function of the DLoG ITC 7’s POWER switch varies depending
on how the device is configured.
•
Only disconnect the computer from the power supply after the computer has been
properly shut down and switched off. Otherwise file errors may occur on the
storage device (in operating systems that have no activated write protection filter).
14.3. Cable cover
•
The supplied cable cover for the external ports must be installed prior to using the
DLoG ITC 7.
14.4. Mounting
•
Only use suitable mounting brackets and screws permitted by DLoG.
•
Ensure that ball-and-socket bases and fastening arms are securely attached.
•
Follow the instructions carefully when attaching all outgoing cables to the strain
relief rail.
•
The service lid may not be used as a handle to turn, hold, or carry the terminal.
•
All fastening brackets and mounting parts supplied by DLoG are only intended for
use in the mounting of terminals and peripheral devices and may not be used for
other purposes n.
•
However, changing conditions during installation may result in operating states
where it may be necessary to optimize the mounting process.
•
When mounting peripheral devices, follow the manufacturer’s instructions. This is
particularly important when welding or drilling supporting parts.
•
To avoid any accidents, make sure your field of vision is not restricted in any way
when mounting peripheral devices. Observe all accident prevention regulations.