| 7
6 |
DLO TRANSDOCK CLASSIC USER MANUAL
Using Your TransDock Classic
About the DLO TransDock Classic
TransDock Classic is basically a radio station that broadcasts your iPod audio
to the FM radio in your car, truck, boat – anything that has a 12v auto power
outlet and FM radio. TransDock Classic also charges and cradles your iPod,
providing easy access to your iPod in your car.
TransDock Classic now features DLO’s IntelliTune technology, which scans
the airwaves and automatically finds the best stations for transmitting. Other
features include four programmable presets, controllable LCD backlight,
Aux-In jack, Line-Out port, and power control.
Setting Up Your TransDock Classic
1. Connect the Charger Arm to TransDock Classic.
Insert the flat side of the Charger Arm into the back of TransDock Classic
and turn it 90 degrees clockwise to lock the Charger Arm into place. Do
not use the included Extension Arm until you have determined that you’ll
need it to fit TransDock Classic into your car. TransDock Classic fits in
most cars with just the shorter Charger Arm.
2. Adjust TransDock Classic to fit your auto power outlet and plug it in.
Loosen the Charger Arm knobs to adjust the angle of TransDock Classic
for the best placement and access to your iPod. Adjusting the arm angles
is easier when TransDock Classic is not plugged into your auto power out-
let. When you’ve found a good fit, tighten the knobs again and then plug
TransDock Classic into your auto power outlet. If you have trouble finding a
comfortable position for TransDock Classic, or it happens to block controls
in your car, use the Extension Arm to achieve the optimum position.
3. Activate IntelliTune.
To activate the IntelliTune feature, press TransDock Classic’s side buttons
simultaneously. TransDock Classic’s LCD screen will flash as it searches
for the optimal frequency. This should only take a few seconds. Once the
search is complete, the screen will display the optimal frequency in your
particular area.
4. Tune your radio.
Match the FM frequency on your radio with the corresponding FM
frequency shown on your TransDock Classic’s LCD screen.
5. Slide your iPod into TransDock Classic and press play.
• For a thinner iPod (80GB iPod classic for example), remove any insert
and attach the included Fit Pad for a perfect fit. Then, slide in your iPod.
• For a larger iPod (160GB iPod classic) - remove any insert, then slide in
your iPod.
• For 3G iPod nano owners - use the included 3G nano Insert to securely
fit your 3G iPod nano into TransDock Classic.
• For 2G iPod nano owners - use the included 2G nano Insert to securely
fit your 2G iPod nano into TransDock Classic.
You can now enjoy your iPod audio over your car stereo, while your iPod is
charging and securely cradled in your car. To control your iPod playback, use
