DLG Energy Soluna S8 EU-A50, Руководство по установке

Страница: 13 / 60

Page 13 of 60
Active power and reactive power setting
The Soluna BESS is capable of producing reactive power and feeding it into grid through the
setting. Feeding in management can be controlled directly by the grid company through a
dedicated communication port.
Volt-Var Response Mode
The Soluna BESS series complies with AS/NZS 4777.2: 2015 standard which introduced the
voltage-var response mode to restrict the power output of the inverter in response to the
voltage at its terminals (refer to AS/NZS 4777.2: 2015).
This mode is not enabled by default and when activated, it will sink reactive power in
response to an increasing voltage (inductive) and supply reactive power in response to a
decrease in voltage (capacitive). The voltage at which the inverter should sink/supply a
reactive power at a given % of the VA rating of the inverter can be adjusted, the default
values are given in the table below.
ALWAYS CHECK THE AS4777.2: 2015 SETTINGS WITH THE LOCAL GRID
OPERATOR
Adjusting Volt-Var mode settings
Click Q(V) icon and set V1~V4, Q1~Q4 to comply with the local Grid.
Parameters Explanation Default
(Reference value: Vac)
V1 Grid voltage 207
V2 Grid voltage 220
V3 Grid voltage 250
V4 Grid voltage 265
Parameters Explanation Default
(Reference value)
Q1 Var % rated VA 0.3
Q2 Var % rated VA 0
Q3 Var % rated VA 0
Q4 Var % rated VA -0.3