
Page 6
2 Cautions
★
The working voltage of the
DLC COVERT II
is 6V. Your
DLC COVERT II
will operate with
either 4 or 8 AA batteries, or using an external 6V DC power supply (, and
outside -).
★
Please insert batteries with shown polarity.
★
Please make sure that the write-protect switch on the side of the SD card is in the
“Unlocked” position.
★
The
DLC COVERT II
has no internal memory for images or videos. Thus please insert
an SD card with the power OFF before testing the camera. Otherwise, the camera
can’t save images and videos. If there isn’t an SD-card inserted or the
write-protect of the SD card is not in the “Unlocked” position, the camera will
shut down automatically after a long beep.
★
Don’t insert or remove the SD card when the power switch is in the ON position.
★
The
DLC COVERT II
will be in USB mode when connected to a USB port of a
computer. In this case the SD-card functions as a removable disk, regardless of the
power switch being in the ON or OFF position.
★
It is recommended to format the SD card with the
DLC COVERT II
before using it for
the first time.
★
Turning the power ON will force the
DLC COVERT II
into setup mode only when the
remote control keypad is connected to the camera, otherwise, the
DLC COVERT II
enters into the Live mode automatically.
★
In the setup mode the
DLC COVERT II
will shut down automatically after 3.5 minutes
if no key is pressed. Please turn on the power again if you want to continue to
work with the remote control keypad.
Содержание COVERT II
Страница 32: ...Page 32 ...