Lubrication Ratio
：
25:1~30:1
（
Trial Run
），
40:1~50:1
（
Normal
Flying
）
Weight: Main engine -1380g, muffler-110g, Ignition-135g
Safety Instructions before starting engines
WARNING!
This engine is not a toy! Serious injury and /or death can
occur from its misuse! READ and become familiar with this
entire instruction manual. LEARN the engine's applications,
limitations, and possible hazards. DLA is not responsible
for any loss, injury or damage resulting from the use of its
products.
1. Keep all spectators at least 30 feet away from the engine
while operating the engine.
2. Do not put anything (e.g. fingers, body parts, objects, et al)
into the rotating propeller
3. Wear proper apparel. Do not wear loose clothing, gloves,
neckties, jewelry, or neck straps
，
which may get caught in the
moving propeller.
4. Always wear eye protection when starting the engine.
5. Inspect engine mount bolts and firewall integrity before
operating the motor.
6. Turn off the engine before making any adjustments.
7. Always use the proper size and well-conditioned propeller.
8. Always use the correct length propeller bolts and make sure
they are tight before every flight.
(Screw thread-locking glue
is necessary)
9. Remember to keep engine fuel in a safe place, away from
any sparks, excessive heat, or anything which could ignite the
fuel.
Remember that gasoline/mixture is highly flammable and
must be handled with extreme caution. Do not smoke while
running or operating the engine.
10. Do not run the engine near loose material such as dirt,
gravel, power cords, ropes, sand, etc.
Loose material can be
drawn into the turning prop causing injury or damage.
Engine installation
1. Make sure each engine comes with a firewall mounting plate
drilled with four holes for #10 size screws.