DL SILENT +5500 Скачать руководство пользователя страница 6

INSTRUCTION MANUAL

 · EN

DL SILENT

 · 2400 · +5500 · +7000

A

B

D

C

G

H

F

A

 Motor body completely submersible and insulated by epoxy resin

B

 Rotor kit with Impeller and bottom bearing

C

 O-rings

D

 4 Suction cups 

E

 Water flow regulator from min. (-) to max. (+) assembled to pre-chamber

F

 Pre-filter Intake grill

G

 Threaded pre-chamber  1” Gas

H

 Hose Fittings

Proceed in the following way: take away the pre-filter (1), the ring nut (2) and 
then the threaded pre-chamber (3); take away the rotor (4) and rinse it under 
fresh water. Always check the condition of the o-rings (5). Any damage to the 
o-rings, even small, can seriously endanger the pump performances. In this 
case it is recommended to substitute them. Rinse each part with water, using 
a soft brush to remove the deposit. Then assemble everything in the inverse 
order.

For the periodic maintenance of the pump, first of all unplug the plug from the electric socket and then take the pump.

DL SILENT

2400

Q max

220 - 240 V

50 Hz

2400 l/h

H max

2.4 m

Watt

40 W

Cable lenght

2.2 m

DL SILENT

 2400

MAINTENANCE

COMPONENTS

Содержание +5500













Отзывы: