DKC SMALLT1, Руководство пользователя

Страница: 82 / 104

80
5.6 UPS Settings
To configure the parameters of the UPS using the function buttons you need to
read the instructions below:

Enter Setup interface. Press and hold the function setting key for more
than 2 seconds, then come to Setup interface, press and hold the inquiring
key (
, ) for more than half a second (less than 2 seconds), select the
function setting, choose the setup interface (during the operation the letters
flash).

Set the numerical values of parameters. Press and hold the function setting
key
for more than half a second (less than 2 seconds), then come to the
setup interface (during the operation the letters stop flashing, but the
numerical values start to flash). Press and hold the inquiring key (
, )
for more than half a second (less than 2 seconds), select the numerical value
in accordance with the function.

Confirm the chosen number. After selecting numerical value, press and hold
the function setting
for more than half a second (less than 2 seconds).
Now, the setting function is completed and the numerical value illuminates
without flashing.

Exit from the setup interface. Press and hold function setting key for
more than half a second (less than 2 seconds), exit from the setup interface
and return to the main interface.

Output voltage setting
LCD display Settings
User may choose the following output
voltage:
208 Vac
220 Vac
230 Vac (по умолчанию)
240 Vac