10
Before starting
1. Before starting, check that the mower and the towing enhed are securely interconnected.
2. Always
wear
approved safety equipment, eye and hearing protection, gloves and work
boots when operating the machine.
3. Check that the engine is set to run at full throttle for the best cutting performance.
4. Carefully rise on the towing device and start work at a slow speed.
Do not exceed the
maximum working speed of 8 kilometers per hour.
CAUTION
Maximum cutting speed is 8 kilometers per hour.
Maximum towing speed is 15 kilometers per
hour (the engine of the machine must be turned off here)
Stop the mower
1. Stop the towing unit, turn off the engine, turn the fuel tap to
the
"OFF" position and pull the
handbrake.
2. Turn off the engine of the machine by turning the key to the "OFF" position.
3. Turn the engine fuel tap to the "OFF" position.
4. Always
remember
to remove the key to avoid unauthorized use.
Transportation of the mower
1. It must be ensured that the engine is turned off.
2. Raise the mower so that the blades are in
the
highest position.
3.
When
transporting the machine, remove
the
spark plug cap from
the
spark plug and
ensure that
it
cannot make contact with the spark plug by mistake.
6. Maintenance and storage
WARNING
Failure
to maintain and store the mower may result in warranty lapses.
General maintenance
• Before performing maintenance,
the
engine of the machine must be turned off.
• After any maintenance, it must be ensured that all screens and safety equipment are back
in place before operating the mower.
• Check all nuts and bolts daily for proper tightening.
• Lubricate pulley bearings, (the knife spindles).
They should not
be
over lubricated.
Use 1
pump for every 15-
20 working hours.
• For each season, all moving parts should be cleaned and lightly lubricated as needed.
• Use a high-gloss machine paint to repair scratches or worn metal surfaces.
• Never
use
pressure washers or water hoses to clean the engine while it is running or hot.
Содержание SP31205
Страница 15: ......
