Bruger Manual
NANO-TEC
58
DK Online A/S
9 REPORTS
X mode -
Read Reports are printed,
without zeroing
the current readings
Z mode -
Reset Reports are printed, the current readings are set to zero.
Reports in both modes have equal formats
– only the X or Z report mode symbols are different.
Report options:
1
–
daily, periodic
2
–
all data, single, range
Choose X or Z mode to print reports accordingly.
To open mode select display, press:
Select report mode, use
and
keys, which navigate you through the list, select the
necessary mode and press
.
The corresponding mode report list is displayed. Choose the necessary report, using
and
keys and press key
to print the desired report or use key sequence provided in
table in next page “ Report Printing Commands”.