DK Digital TS-3000, Руководство пользователя

Страница: 8 / 12

can program a split-second “countdown” of up to 180
minutes at the end of which an alarm signal resounds.
•
For setting the desired timer time, push the SET key
during the timer display. Now, the minutes of the timer
time are flashing and you can set them by means of the
5
or
6
key. Then, you push the SET key once again
and the seconds of the timer time are flashing which
you can again set by means of the
5
or
6
key. Finally
push the SET key.
•
In order to start the “countdown”, push the
6
key. If
you want to stop it, push the
6
key again, also for
continuing.
•
After the timer time has expired, the alarm signal
resounds which can be stopped by tapping the display.
The timer time is, however, saved.
Changing the batteries
If the display looks blurred or the display remains totally
dark, you must replace the batteries. For doing so, open
the battery compartment on the bottom side of the
appliance. Remove the discharged batteries and insert
three batteries (1.5 V, size AAA) according to the layout
that is shown in the battery compartment. When doing so
look out exactly for the compliance of the correct
polarity, otherwise, the appliance will not function and
can be damaged. For a longer useful economic life, you
- 8 -