Fog machine DF-V9C Art.No
4.
Start-up
Attention!
Remove before start-up every packing material.
1.
Fill the tank with fluid. Make sure that there is always enough fluid in the
tank.
2.
Connect the device to the power supply.
3.
The device starts to heat up.
on the receiver lights red.
4.
The heating process is finished. The LED on the remote or the
lights green.
4.1.
Operation
The operation can be made by the wired or the wireless remote.
4.1.1.
Wired Remote
Connect the wired remote with the
Controller”.
1. LED
2. Fog button
V9C Art.No.: 105693
8 / 12
up every packing material.
Fill the tank with fluid. Make sure that there is always enough fluid in the
Connect the device to the power supply.
The device starts to heat up. This process needs 4,5 min, while the LED
on the receiver lights red.
The heating process is finished. The LED on the remote or the
The operation can be made by the wired or the wireless remote.
Wired Remote
Connect the wired remote with the device by using the INPUT “Manual
This LED lights green if the device is heated up
and ready to use.
This button activates the fog output.
Fill the tank with fluid. Make sure that there is always enough fluid in the
min, while the LED
The heating process is finished. The LED on the remote or the receiver
The operation can be made by the wired or the wireless remote.
INPUT “Manual
This LED lights green if the device is heated up
This button activates the fog output.
