djpower DSK-1800, Руководство пользователя

Страница: 5 / 12

2. Introduction
Thank you for choosing the DJ Power DSK 1800 Smoke Machine. We kindly suggest you to read this
manual carefully before using the unit. Abiding by all the instructions of using the DSK-series will
ensure you long-term stable and satisfactory effects. Please follow these operation, safety and
maintenance instructions to ensure the machine’s normal work and prolong its usage life.
2.1. Product description
The DSK 1800 is a Fog machine which can be used standing on the floor or hung up. With the patent
pending Instant Fog Stop Technologie there will be no more Fog output after the Fog Button is
released, the Machine will instantly stop fogging. The Machine also uses the patented Mirror Pipe
Technology which will save the machine of blockage an deposits.
2.2. Unpacking
Open the shipping packing and check whether all the necessary accessories to operate the unit have
arrived complete and intact. If you can see any faulty parts do not connect the Machine to the power
supply and contact your distributor soon.
The shipping packing should contain the following items:
- DSK 1800 machine
- Power Cord
- Remote
- User Manual
- Suspension Handle
3. Usage / Control
3.1. Installation
- Take out the unit from the shipping package; make sure all the foams and plastic padding are
removed, especially in the nozzle areas.
- Place the unit on a flat surface and remove the tank cap.
- Fill the tank with high-quality, water-based fog liquid recommended by the distributor. Any
other types of liquids may cause spraying water or serious clogging problem. After infusing the
liquid, seal the tank with cap. Be careful that the liquid doesn’t exceed the maximum level. Do
NOT OVERFILL.
- Close the Tank and assure yourself, that no liquids came inside the Machine. If you feel
uncomfortable it is also possible to take the tank out of the machine before filling it up. Liquids
inside the machine can cause short circuits and could cause danger for your own safety.
3.2. Starting up the machine
•
Connect the Power Cord (delivered with the machine) to a Power Supply according to the
technical Data of the device. Please make sure the device is sufficiently grounded.
•
Turn on the machine by the Power switch on the back.
•
The switch will light up red when the machine is on Power.
•
You can read “Heating up” on the display now.
•
The machine will need about 9 minutes to heat up. When the heating up is done the display
will show “Ready to fog”.
5 / 12