djpower djV PT-1500, Руководство пользователя

Страница: 6 / 12

Fog machine PT-1500 Art.No.: 114082
6 / 12
It is not allowed to install the device in the grip area of people.
If the device may hang from the ceiling or from high beams, the use of truss
systems is mandatory. The device may not be installed so it can swing freely in
the room.
Please note: Crashing down items can cause serious injuries! Do not install the
projector, if you doubt the safety of a possible installation form!
Before installation make sure that the mounting surface has the ability to carry
the tenfold point load of the own weight of the device.
Mount the device with the mounting-bracket to your trussing system using an
appropriate clamp.
During overhead installation the device must be always secured by a safety
rope which is designed to hold the twelvefold weight of device. Only safety
ropes with quick-release safety fastener elements may be used. Hang up the
safety rope in the hole of the mounting bracket. Direct the rope over the truss
or an appropriate fastening point. Hang up the end in the fastening element
and tie up the locking nut. A safety rope once exposed to failing load or
damaged may not be used furthermore.
The maximum drop exceed must not exceed 20cm.
A safety rope once exposed to failing load or damaged may not be used
furthermore. Adjust the desired inclination angle via the mounting bracket
and tighten the screw.
2.2. Electrical connections
Connect the fixture to the mains with the enclosed power cable and plug.
The earth has to be connected.
Cable (EU) Cable (US) Pin International
Brown Black Live L
Light blue White Neutral N
Yellow/Green Green Earth