8
CLEANING AND DISINFECTING
NOTE:
Inspect the VenaPro unit and follow the cleaning and disinfecting procedures prior to each use.
WARNING:
Device must be turned off and disconnected from the wall outlet prior to and during cleaning or disinfecting and for storage between uses. See Storage section for
instructions on proper storage.
DO NOT IMMERSE UNIT IN ANY LIQUID FOR ANY REASON
•
Clean the outer surface of the pump unit using a soft cloth, moistened with soapy water or 70% isopropyl alcohol.
•
Do not use abrasive or volatile cleaners.
•
Do not place cuffs in dryer.
•
NEVER remove the unit from the cuff.
•
Wipe the exterior of the cuffs using a soft cloth, moistened with soapy water or 70% isopropyl alcohol and let air dry.
•
To ensure the unit IS completely dry prior to use, leave unit in the OFF condition and disconnected from the wall outlet for 30 minutes after cleaning or disinfecting.
USER MAINTENANCE
Contains no serviceable parts. Contact your local Customer Service representative.
Inspect the unit and all components for any damage that may have occurred during shipping or general handling prior to each use (for example, frayed or cut charging cord, cracked plastic
housings, torn cuffs, etc). Refer to image of VenaPro for description of all components.
Do not attempt to connect the wall supply if any damage is noticed.
Avoid subjecting the units to shocks, such as dropping the pumps.
Do not handle the leg cuffs with any sharp objects. If a bladder is punctured or you notice a leak, do not attempt to repair the unit or cuffs. Replacement units are available through customer
service.
Avoid folding or creasing the bladder during use and transportation of the units.
Battery is not replaceable, replacement units are available through customer service.
Contact your local Customer Service representative to receive replacements instructions for any damaged items.
This device is not protected against water. Equipment is not suitable for use in the presence of flammable anesthetic mixture with air, oxygen, or nitrous oxide. The
rechargeable batteries supplied in this unit are not field replaceable. If you have any issues please contact your local Customer Service representative for a replacement
unit.
STORAGE AND TRANSPORTATION
Store in a dry location between -25⁰C (-13⁰F) and +70⁰C (158⁰F).
Relative Humidity: 15% to 93%
Atmospheric Pressure: 525mmHg to 795mmHg
Do not store items in direct sunlight.
DISPOSAL
This unit is an electromechanical device that includes printed circuit boards and rechargeable batteries. Do not discard in landfill. Consult local country requirements for proper disposal
instructions.
Pump control units contain rechargeable batteries. Do not discard the pump unit in regular waste. Bring the unit to your local recycle center or contact your local Customer Service
representative.
