DJO Global Cefar Femina, Руководство пользователя, Страница: 53 / 254

54
Guidance and Manufacturer’s Declaration - Electromagnetic Immunity
CEFAR FEMINA is intended for use in the electromagnetic environment specified below. The customer or user of the CEFAR
FEMINA should assure that it is used in such an environment
Immunity Test
IEC 60601
Test Level
Compliance Level
Electromagnetic Environment -
Guidance
Electrostatic discharge
(ESD) IEC 61000-4-2 ±6kV contact
±8kV air ±6kV contact
±8kV air
Floors should be wood, concrete
or ceramic tile. If floors are
covered with synthetic material,
the relative humidity should be at
least 30%.
Electrical fast transient/
burst IEC 61000-4-4 ±2kV for power supply lines
±1kV for input/output lines
Not Applicable - Battery
powered
Not Applicable - signal lines
less then 3 meters
Mains power quality should be
that of a typical commercial or
hospital environment.
Surge
IEC 61000-4-5
+ 1kV differential mode (line
to line)
+ 2kV common mode (line
to ground)
Not Applicable - Battery
powered
Mains power quality should be
that of a typical commercial or
hospital environment.
Voltage dips, short
interruptions and voltage
variations on power supply
input lines
IEC 61000-4-11
<5% UT (>95% dip in UT) for
0,5 cycle
40% UT (60% dip in UT) for
5 cycles
70% UT (30% dip in UT) for
25 cycles
<5% UT (>95% dip in UT) for
5 sec
Not Applicable - Battery
powered
Mains power quality should be
that of a typical commercial or
hospital environment. If the user
of the CEFAR FEMINA requires
continued operation during
power mains interruptions, it is
recommended that the CEFAR
FEMINA be powered from an
uninterruptible power supply or
a battery.
Power frequency
(50/60Hz) magnetic field
IEC 61000-4-8 3 A/m 3 A/m
Power frequency magnetic
fields should be at levels
characteristic of a typical location
in a typical commercial or hospital
environment.
NOTE: UT is the AC mains voltage prior to application of the test level.