djm direct DJMSL10, Перевод оригинального руководства по эксплуатации

Страница: 3 / 14

2
3. Unpacking
- Open the packaging and remove the device care-fully.
- Remove the packaging material as well as the packaging and
transport bracing (if available).
- Check that the delivery is complete. s Check the device and
accessory parts for transport damage.
- If possible, store the packaging until the warranty period has
expired.
ATTENTION
The device and packaging materials are not toys! Children must not
be allowed to play with plastic bags, film and small parts! There is a
risk of swallowing and suffocation!
4.Intended use
This mitre saw is intended for cutting wood and analogue materials,
The saw is not designed for cutting firewood.
WARNING ! When using electric tools basic safety precautions should
always be followed to reduce the risk of fire, electric shock and
personal injury including the following.
Read all these instructions before attempting to operate this product
and save these instructions.
All persons who use and service the machine have to be acquainted
with this Manual and must be informed about its potential hazards.
Children and infirm people must not use this tool. Children should be
supervised at all times if they are in the area in which the tool is
being used. It is also imperative that you observe the accident
prevention regulations in force in your area. The same applies for
general rules of occupational health and safety
Even when the tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may arise in
connection with the tool’s construction and design:
·
Contact with the blade.
·
Kickback of workpiece and parts of workpiece.
·
Blade fracture.
·
Catapulting of blade pieces.
·
Damage to hearing if effective earmuffs are not worn.
·
Harmful emissions of sawdust when the machine is used in closed
rooms. Always use supplementary dust extraction where possible.
·
Do not use blades that are deformed or cracked.
·
Always remove the plug from the mains socket before making any
adjustments or maintenance, including changing the blade. To ensure
safe operation of the mitre saw you must follow these guidelines:
·
Select the correct blade for the material to be cut.
·
D o not use the saw to cut materials other than those
recommended by the manufacturer.