USB-C Cable
Connect the USB-C port of the video transmitter to a computer, which can be used for
activation, firmware update and other functions.
SDI Cable
Used to transmit SDI signal.
Activation
When powered on, connect the video transmitter to a computer and run DJI Assistant 2 (Ronin
Series) for activation.
Download DJI Assistant 2 (Ronin Series) at https://www.dji.com/xxx/downloads
Linking
To start linking, press and hold the menu dial on the video transmitter. The Linking Status LED
blinks red.
When the linking is complete, the linking status LED turns solid green and the video
transmitter can communicate with the high-bright remote monitor.
Video Status LED
Description
Solid Green
Video input available
Solid Red
No video input
Linking Status LED
Description
Solid Red
Device powered on, but not linked
Blinks Red
Linking
Solid Green
Linking successful. Wireless video transmission normal
Firmware Update
Use DJI Assistant 2 (Ronin Series) to update the firmware of the video transmitter.
1. Power on the device and connect to the USB 3.0 port of a computer using a USB-C cable.
2. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
