©2014 DJI. All Rights Reserved.
25
FAQ
Soldering the ESC
Be sure to solder the thick wires and fine wires correctly when soldering an ESC to the frame arm.
Clockwise (CW) and counter clockwise (CCW) motors should be soldered to the ESC in order of color.
CCW arms
CW arms
G
V
G
P
G
V
G
P
Fine wire
Thick wire
Blue
Black
Red
Thick wire
Fine wire
Blue
Solder pad
Black
Red
Remounting the Propeller
Instructions
1.
Use two M3x8 screws and four washers to remount propeller.
2.
Apply thread locker to the thread of the propeller mount first.
3.
Affix screws with 4Kg.cm (0.4N.m) torque..
Tips: Refer to original screw tensions if unfamiliar with torque measurements. Applying thread locker to the
propeller mount first avoids getting thread locker into the holes of the plastic propeller.
Notes: Loose screws cannot be securely locked with thread locker.
Propeller Precautions
Torque markers on the screws and propeller covers will give you a visual cue to check whether the propellers are
loose. Check the torque markers before every flight.
