Activation and Linking
Activation is required when use the Wireless Receiver for the first time. To activate, connect the
USB port to the DJI Pro Assistant for Ronin.
Press and hold on the link button for two seconds to link to a controller.
The Status LED indicates the status of system, refer to the table below for details.
Status LED Descriptions
Patterns
Descriptions
Blinks red quickly
The device is not activated.
Solid red
The device is activated and not linked to a controller.
Blinks red slowly
The device is linking.
Solid green
Operating at 2.4 GHz
Blinks green slowly
Operating at 5.8 GHz
Specifications
Dimensions 63
×
38
×
19 mm
Operating Environment Temperature -20
℃
to 50
℃
Operating Frequency 2.4 GHz, 5.8 GHz
Input Voltage
5
V-15
V
Compliance Information
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
