dji O3 Air Unit Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 33

dji O3 Air Unit Скачать руководство пользователя страница 33

DJI O3 Air Unit

User Manual

Copyright © 2022 DJI All Rights Reserved.

This content is subject to change without prior notice.

Download the latest version from

https://www.dji.com/o3-air-unit

If you have any questions about this document, contact DJI

by sending a message to

[email protected]

.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies.
Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective

owner companies.

FOV

155°(D)

EIS

Support RockSteady

Supported Video Recording

Format

MP4

Video Resolution

Used with DJI Goggles 2:

4K@50/60fps

2.7K@50/60/100fps

1080p@50/60/100fps

Used with DJI FPV Goggles V2:

4K@50/60fps

2.7K@50/60/100/120fps

1080p@50/60/100/120fps

Weight

Approx. 8.3 g (coaxial cable included)

microSD Cards

Supported microSD Cards

microSD card (Max. capacity 256 GB)

Recommended microSD Cards

Sandisk Extreme U3 V30 A1 32 GB microSDXC

Sandisk Extreme Pro U3 V30 A1 32 GB microSDXC

Kingston CANVAS GO

!

Plus U3 V30 A2 64 GB microSDXC

Kingston CANVAS React Plus U3 V90 A1 64 GB microSDXC

Kingston CANVAS React Plus U3 V90 A1 128 GB microSDXC

Kingston CANVAS React Plus U3 V90 A1 256 GB microSDXC

Samsung Pro Plus V30 U3 V30 A2 256 GB microSDXC

[1] The 5.8 GHz frequency band is currently banned in certain countries and regions. For details, please refer to local laws and

regulations.

[2] Tested in an outdoor open environment free of interference. The video transmission latency data varies with different devices.
[3] Tested in an outdoor open environment free of interference. It should serve only as a reference for the max one-way

communication distance without considering RTH. Please pay attention to the RTH prompts during actual flight.

«
...
31
32
33

Содержание O3 Air Unit


































Отзывы:

Нет отзывов