dji LIGHTBRIDGE 2 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 33

dji LIGHTBRIDGE 2 Скачать руководство пользователя страница 11

Overview

DJI Lightbridge 2

User Manual

©

2015 DJI. All Rights Reserved.

11

LED Pattern

Description

Blinks Red

Link button pressed. Air System is attempting to link with the
Ground System.

Blinks Green Signal detected but not linked to the Ground System.
— Solid Green Successfully linked to the Ground System.

— Solid Red

No signal detected. Check the cable connections and ensure the
Ground System is powered on.

/

Blinks Yellow and
Green alternately

Air System and Ground System have different firmware versions.
Ensure you have the latest firmware installed on both devices.

LED Pattern

Description

— Solid Green AV/HDMI signal detected.

Blinks Green

AV/HDMI signal detected but transmission failed. Reconnect the Air
System power supply and check the cable connections.

— Solid Red

No supported video source is detected. Check that your camera’s
output format is supported. Refer to the Appendix for a list of
supported video formats.

[8]

Video Indicator

Indicates the video transmission status.

[9] Air Vents

Keep clear of obstruction to ensure maximum cooling efficiency.

[10] Antenna Port

Used to attach the Air System antennas.

[7] Control Indicator

Indicates the status of the Air System and Ground System.

«
...
9
10
11
12
13
...
»

Содержание LIGHTBRIDGE 2


































Отзывы:

Нет отзывов