dji FlameWheel330 F330, Руководство пользователя, Страница: 6 / 8

Assembly
Step 1
Install bottom board
Step 2
Install autopilot system
Step 3
Install motors, ESCs
Step 4
Install top board
Step 5
Install propellers
Install screws by appropriate force to
prevent breaking threads. Use adequate
screw glue for installing screws.
Please wire neatly. Make sure wires will not
be cut by frame boards and propellers.
Smooth out the boards edge if necessary
Please install propellers after autopilot system
configuration procedure. Make sure the rotation
direction of propellers are the same as the figure shows
In up figure, arms ①② front of craft, arms ③④ are back of craft. You'd better choose the same color arms for the same direction. See from top, motors
on arms ①③ rotate counter-clock wise, use propellers 8045; motors on arms ②④ rotate clock wise, use propellers 8045R.
①
②
③ ④
Top
Board
Bottom
Board
Screws
M2.5×5
Screws
M3×8
Arm
Motor
Motor
Arm
Make sure use the washers to
install motors as the figure
shows, otherwise the screw will
touch the motor coil.