dji datalink 3, Быстрый старт, Страница: 7 / 78

6
EN
Or
Combination Stick
Command (CSC) to
start/stop the motors.
Refer to Datalink 3 User Manual for more operation information.
Takeoff
Push the left stick up slowly
for takeoff.
Landing
Pull the left stick down
slowly until you touch the
ground. Hold down for a
few seconds to stop the
motors.
6. Industrial Applications
With numerous customizable buttons, which can be channel set by using
compatible flight controller software, the Datalink 3 can be used in agriculture,
mapping and photography, and will support more industrial applications. Datalink
3 does not support image transmission and does not have an internal GPS
module. Please mount the external GPS module on the Ground System when
necessary.
Please follow the steps shown below to mount the GPS module. Be sure to stick
Velcro Type on the back of the master part of the GPS module (A), the top of
the mobile device holder (B), the back of the CAN Hub (C) and the back of the
remote controller (D).
Refer to the Datalink 3 User Manual for more details on industrial applications Specifications.
1
2
3
4
Combination Stick Command
Specifications
• General
Max Transmission Distance 1.86 mi (3 km, SRRC),
(Unobstructed, free of interference) 1.86 mi (3 km, CE), 2.49 mi (4 km, FCC)
Operating Frequency
2.400 GHz to 2.483 GHz
Transmitter Power (EIRP) 19 dBm (SRRC), 19 dBm (CE), 24 dBm (FCC)
Supported DJI Flight Controllers N3, A3, N3-AG, A3-AG
(App supported)