Load setting page:
⚫
Laser indicator switch (Laser control)
⚫
Laser indicator mode
⚫
Searchlight switch :(Led control)
⚫
Searchlight mode :(Led mode)
⚫
Gimbal return head
⚫
Gimbal speed
⚫
Gimbal set offset
⚫
Panel information display
⚫
Temp protect
Functional Specifications
Gimbal
One key back to the cradle head: the cradle head rotates to the forward position
relative to the aircraft;
Follow mode: the cradle head follows the course of the aircraft;
Offset calibration: calibrate the initial middle position of the cradle head;
Speed adjustment: adjust the rotation speed of the dial wheel or the cradle head on
the touch screen;
Light Control
Laser indicator mode: select indicator laser flicker mode, which are long light and flicker
respectively;
Searchlight mode: select the flashing mode of the searchlight, which are long light,
explosion flash and SOS.
Panel information display: searchlight information panel switch;
Temperature protection switch: when the temperature is more than 80 degrees, high
temperature protection, and turn off the searchlight, but retain the laser pointer;
Double Head Linkage
Synchronizing the control attitude of two cradle head;Support X4S, X5S, Z30 X7;
The cloud desk lamp must be mounted in position 2 when linkage, namely the left
side of the official head; 1 position mounted main head camera;
It is absolutely forbidden to mount two cloud lamps and light them at the same time,
which will lead to power overload of the uav. Currently, dual light mounting function
is not supported for the model.
