©
2020
DJI All Rights Reserved.
5
EN
c. Insert the plugs on the left landing gear leg into the mounting holes on the spread tank.
d. Slide the fixing bracket on the right landing gear leg to a position 135 mm below the landing
gear mounting base as shown below, and align the screw holes on the fixing bracket with the
fin on the right side of the spread tank. Tighten the two M3×12 screws, and insert and tighten
one M3×10 (Plus) screw.
M3
125 mm
3. Mount the Spreading System to the aircraft.
a. Loosen the four M3 screws on fixing bracket on the left landing gear leg. Next, slide the fixing
bracket to a position 125 mm below the landing gear mounting base as shown below and
tighten the four screws.
b. Lift the spread tank with the mouth of the tank facing towards the rear of the aircraft.
2. For the Spreading System 2.0, there is the option to mount the fender to the spreader. If
mounted, the fender will prevent materials from being spread to the rear of the aircraft.
5 cm
1
2
M3×8
c. Remount the two landing skids using the eight M3×6 screws.
Содержание Agras MG-1P
Страница 1: ...Series Spreading System 2020 03 v1 0 User Guide...
Страница 10: ...2020 11 CHS M3 1 MG 1S a 8 M3 6 b 4 8 M3 6 c 8 M3 6 1 2 4 M3 6 2 0...
Страница 12: ...2020 13 CHS 1 2 3 App 4 89 1 0 0 5 0 6 kg 1 kg 4 6 m 4 m s 2 0 3 kg 8 kg 5 7 m 5 m s 5 4 A B A B...
Страница 13: ...14 2020 CHS M M App App 1 2 a b 90 2 3 1...
