6. SGL/CTN BUTTON – You can choose between “single track mode” and “continuous play”.
Continuous play: all the tracks in the USB stick will be played in order without interruption.
Single track: player stops at the end of each track and waits at the beginning of the next track.
Push the SGL/ CTN button for more than 1 second to switch between normal and “auto cue”
mode. In “auto cue” mode the player waits at the first music note of each track.
7. TIME BUTTON – You can select different time display by pressing the TIME button to switch
between elapsed and remaining time.
8. SOURCE SELECT BUTTON – This button lets you toggle between USB Port A and B. In other
words, you can select which USB port will be activated and the relational LED will be lit. The
function can only be selected under pause mode.
9. USB
A
PORT
– This is the USB port where you insert your USB mass storage device for playing
MP3 files.
10. REV. BUTTON – This button is used to activate the reverse play mode. This function will play your
track or loop in reverse.
11. ECHO BUTTON – This button is used to activate and deactivate the ECHO effect.
12. FLANGER BUTTON – This button is used to activate and deactivate the FLANGER effect.
13. FILTER BUTTON – This button is used to activate and deactivate the FILTER effect.
14. LCD DISPLAY – This high quality LCD display indicates all the functions, as they are occurring.
This display is viewable at several comfortable angles.
15. TRACK KNOB – Use this knob to select track or folder, depending on these two different modes as
below.
In TRACK mode, use to select a track. Turning track knob will navigate between tracks. Holding
down and turning track knob will rapidly forward / back skip through the tracks by 10 tracks per
click.
In FOLDER mode, turning track knob will forward / back skip between folders.
You can also switch between displaying Folder Name/FILE NAME/TITLE/ARTIST/GENRE/
BITRATE for easy searching by each pressing the TRACK button. Release the TRACK button
when you see the information you want to keep on the display. You can find more information in
basic operation paragraph.
16. SEAMLESS LOOP (See basic operation for more information.)
IN BUTTON – This function allows you to set a CUE POINT without music interruption. This
button also sets the starting point of a seamless loop.
OUT BUTTON – This button is used to set the ending point of a loop. A loop starting point is set
by pressing the IN BUTTON. Pressing the OUT BUTTON set the loop ending point. The loop
will continue to play until the OUT BUTTON is pressed once again.
RELOOP BUTTON – If a SEAMLESS LOOP has been made, but the Player is not actively in
SEAMLESS LOOP mode (a loop is not playing), pressing the RELOOP BUTTON will instantly
reactivate the SEAMLESS LOOP mode. To exit loop, press the OUT BUTTON. LOOP and
RELOOP will appear in the LCD DISPLAY when the RELOOP function is available.
17. CUE/ BUTTON – Pressing the button will activate the CUE PLAY function and the music will play
instantly from the last cue point.
18. PITCH ON/OFF BUTTON – This button is used to turn the PITCH SLIDER function on and off. The
pitch percentage can be changed between 6%, 12%, 25% and 100%. 6% will allow the least
amount of pitch manipulation and 100% will allow the most amount of pitch manipulation.
19. TEMPO LOCK BUTTON – This button is used to switch the TEMPO LOCK function on/off.
CONTROLS AND FUNCTIONS TOP PANEL
ESP
AÑOL
IT
ALIANO
NEDERLANDS
ENGLISH
FRA
NÇAIS
DEUTS
CH
4
