RECALLING THE HOT CUE AND SAMPLES
(1).
Activate the Memory mode by pressing the MEMORY Button (MEMORY Button lit in red)
(2).
Insert the USB Device containing Hot Cue and Samples database.
(3).
“Recall” will be shown on LCD indicating that the unit is reading the Hot Cues and Samples from the first
folder. The BANK Buttons will be lightened one by one.
(4).
As the HOT CUE database is stored per folder, if you want to recall the CUE Memory for a desired folder,
please activate the Memory mode
(MEMORY Button lit in red)
and select that folder.
Note:
Recall of cue points and samples may not work properly if the content of the USB drive is modified after
storing.
7. FRAME SEARCH
This is done by first pausing then using the jog wheel to set the starting point. (When you use the jog wheel
the monitor function allows you to hear what is playing.) Once you reach your desired starting point, you can
set a cue (starting) point by pressing PLAY/PAUSE button.
8. SCANNING (fast forward/fast reverse)
There are 2 ways to fast scan the track:
(1) Turn on the Outer Jog Wheel Search Mode by press
ing
the JOG SERACH BUTTON. Turn the outer jog
wheel forward or reverse to search through a track.
(2) Press and hold the SEARCH Button.
You will scan forward or reverse at 4 different speeds depending on how much you turn the wheel or how
long you press the Search Buttons.
9. LOOP PLAY
You can create a seamless loop between two points continuously.
(1) Press PLAY/PAUSE button to start a music playing. The PLAY/PAUSE button’s LED lights.
(2) Press IN button. This sets the starting point of the SEAMLESS LOOP. The IN button LED
will light.
(3) Press OUT button to set desired ending point of the SEAMLESS LOOP. You will know you
are in SEAMLESS LOOP mode because IN and OUT LED will light and flash. RELOOP
INDICATOR in LCD DISPLAY will also flash. Sound will continue with no interruption
(SEAMLESS LOOP).
(4) To exit SEAMLESS LOOP, press OUT button LED will stay on but not flash.
Music will resume normal play.
(5) To replay loop, press the RELOOP button. IN and OUT LED and RELOOP INDICATOR in
LCD DISPLAY will all begin flashing again.
MODIFYING LOOP LENGTH
(1) (Must be in SEAMLESS LOOP mode). If a SEAMLESS LOOP has not been created, follow instructions
on this page for creating a SEAMLESS LOOP. If a SEAMLESS LOOP has already been created, press
RELOOP BUTTON to reenter the SEMALESS LOOP mode.
(2) Next, press OUT BUTTON to return to normal play. This disengages the SEAMLESS
LOOP mode.
(3) Press OUT button again for new desired ending point of the loop.
(4) To press and hold the RELOOP button until the end time of the loop is displayed to edit a
loop and the OUT button LED will light and flash, turn the JOG WHEEL to edit loop
shooter or longer, and then press RELOOP to confirm the change.
OPERATION INSTRUCTION
8
Содержание uSolo Pro
Страница 1: ...PROFESSIONAL USB MP3 PLAYER USER MANUAL...
