DJ-Tech Cube 50, Руководство пользователя

Страница: 5 / 10

E-4
Parts Description
1.MIC input
(6.35 Phone jack)
This jack can take either a 6.3mm unbalanced or a balanced cable.
2.Line input (RCA)
You can connect your device to this socket with the RCA cable
3. Wireless MIC Receiver antenna
Connect the Antenna here.
4.Power Switch and Power indicator
This switch works as ON/OFF switch and shows the ON/OFF status of Cube
50.
5.Charging indicator
It shows the charging status: Red = Low Battery (20% left), Green =
Charging
6.MIC Volume
Turn MIC volume knob to adjust the volume, do not aim the microphone
to the speaker
7.Line Volume
This knob controls the volume of the RCA input.
8.Wireless MIC Volume
Turn this knob to adjust the wireless microphone volume
9. Wireless MIC RF Indicator
It shows the connectivity of the wireless microphone,
(Green = Good signal strength, Off = Wireless signal is not detected)
10.Talkover
When talkover is ON and signal on microphone is significant, music from
AUX and iPod will be attenuated.
11.Master Tone
This knob controls master output tone of the Cube 50.
12.Master Volume
This knob controls the master volume
1
２ ３
４ ５
6
7
８ ９
10 11
1
２