USER MANUAL
CDX210
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
CD Player Functions:
1. POWER BUTTON
Press the power switch to turn the unit on. To switch the power off press the power switch again.
2. JOG & SHUTTLE WHEELS
Shuttle
: Use the dial to select the scanning direction and speed. The disc is scanned in the
forward direction when the shuttle dial is turned clockwise from the neutral position, in the
reverse direction when the shuttle dial is turned counterclockwise. The scanning speeds up
when the shuttle dial is turned faster.
Jog
: In pause mode, if you turn the jog, the point at which the sound is being produced moves by
a number of frames corresponding to the number of clicks. Clockwise moves the point forward;
counterclockwise moves the point backward. In play mode, the jog increases or decreases the
speed of the song. (clockwise : increase, counterclockwise : decrease).
3. TIME BUTTON
Use this knob to choose the time mode: Elapsed time, remaining time or total remaining time.
4. REPEAT BUTTON
Use this button to repeat one track or all the track of the CD.
5. IN BUTTON ( LOOP SYSTEM )
This button sets the beginning of the loop. The Loop indicator on the display flashes.
6. ROBO/SINGLE/CONTINUE:
Pressing ROBO activates the SINGLE function . The SINGLE function causes the unit to play one
song and then stop. Pressing the ROBO button a second time activates the CONTINUOUS function
causing the unit to play continuously (after the last track, the unit will return to the first track of the
disc and continue to play).pressing the ROBO button a third time activates the ROBO, START
function causing the unit to altemate play between two CDS using both sides.
7. PGM BUTTON
In STOP mode, you can program several tracks (20 tracks max.) :
- Press the STOP button to enter in the stop mode
- Press the
button to enter in the program mode
- Use the skip track buttons to choose the track you want to listen then press the
button to
enter your choice.
- Use one more time the skip track buttons to choose the track you want to listen then press the
button to enter your choice.
- Repeat the operation to select all the track you want to listen
- Press the PLAY / PAUSE button to start the playback
8. OUT BUTTON ( LOOP BUTTON )
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
PGM
PGM
PGM
9. RELOOP BUTTON ( LOOP SYSTEM )
This button is used to start the last saved loop. To finish the loop, press the reloop button.
10. SKIP I<< BUTTON
Use this switch to re-start the track or to select the last track.
11. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started
12. +10 BUTTON
Use this button to jump of 10 tracks in one press.
13. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
14. SKIP >>I BUTTON
Use this knob to select the next track.
15. PITCH CONTROL
Use this fader to increase or decrease the speed of the track.
16. PITCH BEND + BUTTON
The pitch will automatically rise when the + button is pressed and return to the original pitch
when it is released.
17. PITCH BUTTON
If you push this button, the adjustment of the pitch potentiometer is available.
18. DISPLAY
19. PITCH BEND - BUTTON
The pitch will drop while the - button is pressed and return to the original pitch when it is released.
20. EJECT BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: disc holder will not open unless stop or pause button has been pushed first.
21. DISC-TRAY
To enter the disc, please refer to the explanations under 6.2 CD-tray.
22. SEARCH BUTTON
Pressed the button to switch the function of jog dial between SEARCH and PITCH BEND, when
the indicator LED is light, dial the jog for quick search forward and backward, when the indicator
LED is off, dial the jog for pitch bend functional the jog is unmoved for 8 seconds, the indicator is
off, and the jog is for pitch bend function.
1
2
Содержание CDX-210
Страница 1: ......
