SUB-1G DVK development kit product manual
11
Fig. 7-3 Command Zone
b. Click the common command button directly to send the SUB-1G AT command, see
Fig.
7-4
. If you want to modify the common command, please select the
Cmd Mgr
button, and
then select the command that you want to modify, then click the
Modify Cmd
button to
edit it, after that, if you click the command button you have modified, the command will
be displayed in the
Send Zone
for editing again or send it to UART port directly, see
Fig.
7-5
.
Fig. 7-4 Common Command Zone
Fig. 7-5 Send Command
2. Timing Sending
If you want to send the command you desired periodically such as transmitting data, you
can select the
Send Recycle
mode as shown in
Fig. 7-6
. Of course, you also may
configure the Recycle periods, whose unit is millisecond, and the default value is 1000
millisecond.