DIY DIY-4, Руководство по монтажу

Страница: 15 / 37

DIY Log Cabins Construction Manual
© 2019 DIY Log Cabins, LLC 4-15
2. BEFORE adding interior finish trim, thoroughly fill any open pockets
around the window. Loose insulation, air conditioning foam gasket, or
expanding foam sealant/insulation can be used. When using “foam-in-a-
can” products, please READ AND FOLLOW the sealant manufacturer's
application instructions THOROUGHLY as some may not be
appropriate for this application. Do not pack the openings so much that
the side jambs are put under any pressure.
3. Place all interior window trim (not provided) according to details.
4. Insert the metal drip cap in the kerf that was previously sawed in the log
over window and door units. Run a bead of caulk along the kerf before
inserting the drip cap, then be sure there is a solid bead of caulk at the
top edge where the wood meets the metal. Be sure to run the drip cap
slightly beyond the outside edges of the exterior trim; do not limit the
flashing to just over the window or door.
5. Carefully apply a continuous bead of caulk to weatherproof around all
exterior window trim AND along the top of the drip cap/kerf per window
and door installation details.