manualshive.com logo in svg

Dixon ZTR 502, Руководство оператора

Поделиться
Скачать
Dixon ZTR 502 Скачать руководство пользователя страница 24

Page 21 

CARE AND MAINTENANCE - MODEL 502

 

CLEANING THE MOWER:

 

A clean machine is a source of pride to the owner. However, cleaning by use of high 
pressure commercial washes is not recommended. The high water pressure, combined with 
solvents or alkaline detergents, can lead to corrosion of electrical components or 
damage to the sealed bearings used on your mower. A better approach is the use of mild 
household soaps and low water pressure. A stiff brush can be used to loosen excess 
grass and dirt build up. Avoid directing water pressure onto the mower deck hub 
assemblies, electrical wiring and engine components such as air filter openings. Never 
wash or clean the Sundstrand BDU 10 L hydrostatic transmissions, as damage to these 
units could result. To remove excess water which accumulates during washing of the 
mower either blow off with compressed air, if available, or start the engine, allowing 
a long enough operation time to dry thoroughly. It is advisable to engage the mower 
deck for a short time to disperse

 

all water from pulleys and belts.

 

Please help protect the environment by avoiding all chemicals which may damage or cause 
harm to plants and animals in your area.

 

Содержание ZTR 502





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды