14
SPECIFICATIONS
Model ZTR 1950 and 2300
CHASSIS:
11 GA - rectangular tube
SEAT:
Designed for operator comfort by use of high-density closed cell foam
padded back and arm rests, upholstered with Cordura
TM
water-
repellent fabric. Seat is adjustable fore and aft. Mounted on operator
suspension system.
MOWER DECK:
Two decks are available. The 60” is made of stamped steel. The 50”
is made of 11 GA fabricated welded construction with external
reinforcement ribs. Three blades combine for a 50” or 60” cut width.
Cut height approximately 1.5” to 5” via 8 position lift handle.
BLADE DRIVE:
Electric clutch
DRIVE SYSTEM:
Each rear wheel is independently driven by a HydroGear BDP 10A
pump and a White CE 14 hydraulic motor.
ENGINE:
Model 1950:
19HP Kawasaki , overhead valves, replaceable oil filter, full pressure
lube system, dual element air cleaner, integral fuel pump.
Model 2300:
23 HP Kohler Command, 4-cycle, V-Configuration, Overhed Valve, Air-
Cooled, Gasoline, Vertical Shaft, Aluminum Head and Crankcase with
Cast Iron Liners, Full Pressure Lubrication/Full Flow Filter, Pulse Type
Fuel Pump, Fixed Jet Carburetor w/Smart-Choke, Electronic Ignition,
In-line Fuel Filter, Dual Element Air Cleaner.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on parking brake
and blade drive clutch.
TIRES:
Front
11 X 4 X 5 ribbed tread (16-21 lbs)
Rear
20 X 10 X 8 Turf Master (8-14 lbs)
CAPACITIES:
Fuel - 11 gallon (approximately)
Hydrostat Oil tank - 4 quart with in-line 40 micron filter
Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:
Width
60” (50” Deck), 72” (60” Deck)
Height
46.5”
Length
75”
Weight
737 lbs, (50” Deck], 770 lbs (60” Deck)
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
