manualshive.com logo in svg

Dixon FloTech FT555PA, Руководство пользователя, Страница: 44 / 49

Поделиться
Скачать
Dixon FloTech FT555PA Скачать руководство пользователя страница 44

FloTech FT555PA/PW Automatic Truck Overfill System Tester

Page 44      10902PA Rev C    FT555PA/PW Truck Tester

     TRAILER TEST

------------------------------------------------------------

A) API EXTENSION TEST CABLE

Use this cable to connect the FT555PA/PW to an API socket located in a 
small space or within a cabinet. By using this extension, the tester is free 
to sit wherever is convenient for the user. 

This test cable will allow all 

testing of your trailer through the installed API Socket. 

INDIVIDUAL COMPONENT TEST

------------------------------------------------------------

B) THERMISTOR/2-WIRE SENSOR TEST CABLE

Use this cable to connect the FT555PA/PW directly to one thermistor/2-
wire sensor.

C) CONTINUITY TEST CABLE

Use this cable to verify that pin 10 of the API socket has continuity to the 
trailer chassis.

D) GROUND UNIT TEST CABLE

Use this cable to connect the FT555PA/PW directly to a groundbolt, 
groundball, or ground wire.

E) OPTIC/5 WIRE PLUG AND PLAY ADAPTER

Use this cable in combination with the optic/5-wire sensor cable to 
connect to one optic/5-wire plug and play sensor

.

 

F) J560 SOCKET TEST CABLE

Use this cable to connect the FT555PW directly to a J560 socket.

G) OPTIC/5-WIRE SENSOR TEST CABLE

Use this cable to connect the FT555PA/PW directly to one or more 
optic/5-wire sensors.

H) PLUG AND PLAY TEST CABLE

Use this cable to connect the FT555PA/PW directly to one plug and play 
sensor.

*Tester is incompatible with the following thermistors: Scully SP-BL, SP-BLU, SP-BLH, 
Civacon Liberty 1510-160

Содержание FloTech FT555PA


















































Отзывы:

Нет отзывов