Dixon BAYCO 5204SFI, Инструкции по эксплуатации и обслуживанию, Страница: 9 / 10

5204SFI API Valves
5204SFI 090112 REV 3 9
c.) Remove the retaining ring (18) from the groove of the pipe end
(1). Push the sight glass out by the screw drivers or the rod. Make
sure not to damage the pipe end.
d.) Once the sight glass passes the inside O-ring, remove the screw
drivers or the rod. Continue to push the sight glass out from the
inside end by the screw drivers or the rod till the sight glass is out.
Make sure not to damage the pipe end.
Remove the O-rings (item 19, 2 pieces) from the grooves of the pipe
end (1). Clean all grooves and the inside of the pipe end (1) to
remove any debris and oil. Make sure not to scratch or damage the
grooves and inside of the pipe end.
Lubricate
NEW O-rings (item 19, 2 pieces) and put them into the
grooves in the piped end (1).
Install the
NEW sight glass (20) and make sure that the side with a
chamfer gets into the pipe end (1) first. Push the sight glass evenly
into the piped end till the side with a chamfer stops by the pipe end.
Use the old sight glass as a tool to push the new sight glass, if
necessary.
Install the
NEW retaining ring (18) into the groove of the pipe end.