INSTALLATION INSTRUCTIONS
Install blower and deck assembly to the mower
11.
chassis. Ensure that blades are level with the deck
and the deck is pitched correctly. Make any adjust-
ments before proceeding.
Install blower drive belt so blower rotation is clock-
12.
wise when viewed from the operator's position.
To assist with belt installation, tighten the nut on
13.
the threaded spring rod a few turns. This will pull
the fl at idler forward and allow more clearance
with the V-idler. Once belt is in place, loosen the
nut on the threaded spring idler for proper belt
tension.
8059-026
8059-022
Blower Pulley
Drive Pulley
"V" Pulley
Flat Idler
Install belt guard to blower assembly using ¼"
14.
washers and ¼" wing nuts.
Belt Guard
