M095.x
6 of 6
30.
Remove the protective paper from the back side of the Foam, Poly Strip Narrow (803,301,58x.x1)
and apply gasket to the cleaned area as shown in Figure 10.
31.
Lay the new assembly on top of the new Evaporator Fan Shroud.
32.
Secure with (2) Tinnerman Clips (800,903,49x.x1), one on each side.
33.
Install the Can/Bottle Chute.
34.
Secure the Can/Bottle Chute with the two (2) Screws removed in Step #3.
35.
Plug in the Main Power Cord to the wall outlet and test new fan for proper operation.
This edge goes to the back of
the cabinet.
Figure 9
Clean
this area.
Figure 10
