Dixie Narco DNCB 501E, Техническое руководство

Страница: 13 / 85

INSTALLATION & SETUP
12
To change "Electronic Counter" four button code:
At "Electronic Counter" press select button 1, "4231" (representing current four button code) will show on
display. Press and hold select button 1 until the far left digit starts blinking indicating it can be changed.
Press the select button which is desired for the code. The next digit will start blinking; press the select
button which is desired for the code. Continue this process until all 4 digits are set. Note: The four-button
code must use select buttons 1 through 9 only.
Note: There is a five (5) minute time-out that will return the vender to normal vending mode.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
Limited Access
This function is used to program the vender to use the Limited Access Features. To move to Secondary
Price Menu, press & hold select buttons 1 & 2 simultaneously, to enter the sub-menu press select button
1. The following are sub-menus of Limited Access Menu: "Selects", "Days”, “Start 1”, “Stop 1”, “Start 2”,
“Stop 2”, and “Return”.
Selects
This function is used to set selection(s), which, will be limited during certain periods of the day.
To view the selection setting condition, press select button 1. The display will show "Selection 01
- # where # is a “0” OR “1” depending on whether the selection is enabled (1) or disabled (0).
Press and hold select button 1 to toggle between “0” & “1. Press select buttons 1 & 2
simultaneously to scroll through all available select buttons, “NONE”, “ALL”, and “Return”.
Pressing select button 1 when “ALL” or “NONE” are displayed will cause the display to flash
momentarily. Press select button 1 at the “Return” prompt returns to “Selects”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
Days
This function is used to set the days of the week to be affected by limited access.
Day of Week: Sunday Wednesday Saturday Return
Monday Thursday All Days
Tuesday Friday not found
Press select button 1 and "Monday#" will show on the display, where # is “0” (disable) or “1”
(enable). Press and hold select button 1 to toggle between “0” and “1”. Release the select button
with the display showing the setting you wish to use. Press select buttons 1 & 2 simultaneously
to scroll through all available days, “All Days”, “not found”, and “Return”. Press select button 1 at
the “Return” prompt returns to “Days”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
Start 1
This function is used to set the hours and minutes to start period 1 limited access. Press select
button 1 and the current four-digit hour and minute setting will to be displayed (24 hour).
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.
Stop 1
This function is used to set the hours and minutes to stop period 1 limited access. Press select
button 1 and current four-digit hour and minute will be displayed. (24 hour).
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.