Dixie Narco DN 2145, Техническое руководство

Страница: 20 / 89

20
FORCE FORCE N
AUDIO FEEDBACK DISABLED
SET REGULAR PRICES 99.95
LIST ERRORS Pwr Out
TUBE FILL/DISPENSE CLEARED
DAYLIGHT SAVINGS DISABLED
NOT AVAILABLE CANCEL N
CREDIT TIMER CANCEL N
DOOR OPEN 0
POWER OUT 0
DISPLAY HEALTH GUARD GUARD
ENABLE DOLLAR SIGN ENABLED
NOT AVAILABLE TIME CLEARED
DISPLAY RESET DISABLED
HEALTH CONTROL DISABLED
DROP SENSOR DISABLED
PASSWORD 0000
STS ENABLE DISABLED
CUSTOM STS CLEARED
VEND LIMIT 0
HEALTH RECHECK DISABLED
RETRY LIMIT DISABLED
SOLD OUT ENABLED
MACHINE NUMBER - Press key “1”
(PASSWORD REQUIRED)
Allows assigning a user number to the machine for
audit and/or inventory control requirements. Press
the number “1” on the keypad and “MACHINE
NUMBER” will scroll across the display and then
change to the number currently assigned to the
machine (i.e. ID 1). Press the “*” key and the display
will read “ID”. Enter the new number (numeric field, 4
characters maximum). If the new number is less
than 4 characters press the “*” key after entering it
and the display will read “OK” momentarily and will
return to “SETUP MODE”.
SET HAPPY HOUR
-
Key “2”
(PASSWORD REQUIRED)
Not available in software revisions 030.81 and
higher.
Allows the service technician to set times and days
for Happy Hour operation. Press the number “2” on
the keypad and “SET HAPPY HOUR” will scroll
across the display. Happy Hour start time, end time,
and days of the week can now be programmed into
the system. All times must be entered in military time
format (24 hour clock). Setting Happy Hour is
covered in detail in the INITIAL PROGRAMMING
section of this manual. Press the “CLR” key to
return to “SETUP MODE”.
SET NOT AVAILABLE TIME - Press key “3”
(PASSWORD REQUIRED)
Password protected. Before entering or changing
this setting you must enter the password if one has
been assigned. This mode allows up to 4 different
time periods that use of the machine may be
restricted. Refer to Initial Set Up section Set Not
Available Times.
WINNER MODE - Press key “4”
(PASSWORD REQUIRED)
Not available in software revisions 030.81 and
higher.
Allows the service technician to set the machine up
to dispense a free product on a random basis. This
mode CANNOT be made item selective. If the
Winner Mode is set, each product in the machine is
subject to being dispensed free. The winning
customer is determined by the program picking a
number at random from 1 to the winner mode set
number. Inputting a 0 disables this mode. Press the
number “4” on the keypad and “WINNER MODE” will
scroll across the display then change to “WINR 0”.
Enter a number from 1 to 255 and press the “*” key.
The display will read “OK” momentarily. The mode
will be set and the display will return to “SETUP
MODE”.
DATE/TIME - Press key “5”
Shows the day, date, and time setting currently in
the system in following format: SUN 01/02/00 1330
Press the number “5” on the keypad, “DATE/TIME”
will scroll once, then the day, date, and time will
scroll across the display. Setting the day, date, and
time is covered in detail in the INITIAL
PROGRAMMING section of this manual. Press the
“CLR” key to return to “SETUP MODE”.
TOTAL SALES - Press key “6”
Shows total sales since machine manufacture or last
MAS-TER RESET. This total is not cleared by
CLEAR TOTALS. Press the number “6” on the
keypad, the display will scroll “TOTAL SALES” then
change to $#.##. Press the “CLR” key to return to
“SETUP MODE”.
ENABLE HEALTH CONTROL - Press key “7”
Allows the service technician to select items to
ENABLE HEALTH CONTROL. When enabled, if the
temperature in the vender does not reach 41
degrees
F within 30 minutes after the service door is
closed, a “HEALTH TIME” error will occur and
lockout the enabled selection(s) from vending until
after the error is cleared. Also, if the temperature in
the vender goes above 41 degrees
F for more than
15 minutes after the initial cool down period, a
“HEALTH CONTROL” error will occur and lockout
the enabled selection(s) from vending until the error
is cleared. Press the number “7” on the keypad and
the
display will scroll “ENABLE HEALTH
CONTROL”. Press the “*” key and the display will
show ‘ITEM”. There are now three choices:
1. All selections. Press the * key and all
selections in the vender will now be set for