
11
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Start-Up and Operation of Mower
(Continued)
To Stop The Mower:
NOTE:
In case of emergency, engine may
be stopped by turning the ignition key to the
OFF position.
1.
Move steering speed control levers to neutral
position to stop mower movement.
2.
Push deck engaging switch (PTO) down to
disengage mower deck blades.
3.
Pull parking brake lever all the way up to set
parking brake.
4.
Move throttle to the idle position.
5.
Allow engine to idle for two minutes before
turning key off.
6.
Turn ignition key to the OFF position and re-
move key, even if leaving mower unattended
for only a few minutes.
7.
Depress deck foot pedal to raise mower deck
to highest position. Engage deck lock handle.
Safety Interlock System
The mower has a system of safety interlock switches
that will not allow the mower to start unless these condi-
tions are met:
•
Steering speed control levers in
neutral lock position
•
Parking brake set
•
Deck engaging switch (PTO) off
•
Seat is occupied
If the seat is vacated during mowing, without position-
ing the controls as previously outlined, the engine will
be stopped by the safety interlock system.
Deck Height Adjustment
Set the mowing deck appropriately to achieve the de-
sired height of your cut. The recommended cutting
height is 2-3 inches (5-7 cm), though your preference
may be a higher or lower cut. Tall grasses or weeds
should be cut with the mower deck set to its highest posi-
tion.
The fi rst time you mow, set the cut height to a little higher
than normal, then adjust accordingly as follows:
1.
Refer to the deck height indicator decal, directly
to the left of the deck height adjustment rod.
2.
Determine the appropriate hole setting for
your desired cut height.
3.
Depress the deck foot pedal to lift the deck.
4.
Reposition the deck height pin to the selected
hole setting, then release the deck by slowly
releasing down pressure on deck foot
pedal to lower deck to new height setting.
Содержание Iron Eagle 2350
Страница 25: ...23 Dixie Chopper 6302 E County Road 100 N Coatesville IN 46121 www dixiechopper com Notes...
Страница 26: ...24 Dixie Chopper 6302 E County Road 100 N Coatesville IN 46121 www dixiechopper com Notes...
Страница 27: ...25 Dixie Chopper 6302 E County Road 100 N Coatesville IN 46121 www dixiechopper com Notes...