dixell XWEB5000 EVO, Руководство по установке

Страница: 66 / 72

XWEB SERIES Installation Guide
Pg. 66/72 23/05/2007 1592010850
the Browser address bar. Bookmark the address with personalised
name for the future connections.
Ask your provider for more details about the rent of a the static IP.
This the internet system requirements for the best result:
Wide band connection.
At least 1 static IP addresses for the XWEB5000.
The internet connection is established through a device called
Router that receives and sends the data as interface between an
Intranet and Internet. The Provider also assigns the address of the
router that is called IP WAN.
Remember that the default value of the IP of the XWEB5000 is:
192.168.0.200.
Depending on the contract the Provider can also supply the router,
otherwise the user can buy it separately.
ALWAYS : ask qualified personnel for the router installation by using
this information.
Used ports that are mapped to the LAN side:
80 (used for the HTTP access)
22 (used for SSH connection)
443 (used for SSL protected connection)
10000 (used for the internal modules of the system)
The above ports are all related to the XWEB5000 IP address
192.168.0.200.
While the ports on the WAN side are:
Telnet (to configure the router from a remote, also via Internet).
HTTP (To access the XWEB5000).
If working with the router GATEWAY and DNS check your Internet
contract details. Depending on your network topology you may need
a reversing NAT on port 80. It is not enough to link port 80 on
Router side to port 80 on intranet side. Some firewall or Router
need also di reverse setup.