manualshive.com logo in svg

Division 6 CEM3340 VCO, Инструкции по сборке, Страница: 3 / 3

Поделиться
Скачать
Division 6 CEM3340 VCO Скачать руководство пользователя страница 3

CEM3340 VCO Build Instructions

Page 3/3

12

Install Knobs on Pot Shafts

Turn the pot shafts all the way counter-clockwise.  Push the knobs onto the 
pot shafts with the pointers at about the 7 o’clock position.

13

Install IC

Before inserting U1 into its socket, you may need to bend the pins inward a bit 
so that they’ll line up with the socket holes.  Lay the IC on its side on a flat 
surface, then gently press down on the top of the chip so that the pins bend 
evenly.  Repeat for the other side of the chip.

Insert the chip into its socket, making sure that the pin 1 dot/notch on the chip 
is on the same end as the pin 1 notch in the socket.

THE END

Содержание CEM3340 VCO

Страница 1: ...eads of the resistors like you did with the diodes Insert the resistors into their proper locations see BOM Polarity doesn t matter for resistors but your board will be easier to troubleshoot and look neater if you line up all the tolerance bands gold the same direction Bend the leads outward underneath the board to hold the resistors in place Flip the board over solder the resistor leads then tri...

Страница 2: ...r is flat against the board then solder it into place The pins are short enough that they don t need to be trimmed 6 Install Trim Pots Insert R13 and R14 into the PCB and solder into place Trim the leads If you are using the board by itself or creating your own synth you can stop here If you are building a Eurorack module keep going Flip the board over From here on out all the parts go on the othe...

Страница 3: ... Before inserting U1 into its socket you may need to bend the pins inward a bit so that they ll line up with the socket holes Lay the IC on its side on a flat surface then gently press down on the top of the chip so that the pins bend evenly Repeat for the other side of the chip Insert the chip into its socket making sure that the pin 1 dot notch on the chip is on the same end as the pin 1 notch i...

Отзывы:

Нет отзывов