http://www.diviotec.com
10
Additionally, users can change the network property of the IP Camera to DHCP
or Static IP directly in the device finding list. Refer to the following section for
changing the network property.
Example of Changing IP Camera
’s Network Property
Step 1:
In the finding device list, click on the camera which its network property
is to be changed. On the selected item, right click and select <Network
Setup>. Meanwhile, record the MAC address of the camera for future
identification.
Step 2:
The Network Setup page will come out. Select <DHCP>, and click
<Apply> button down the page.
Step 3:
A popup window will appear for confirming the setting changes, click
on <OK> and wait for one minute to re-search the camera.
Step 4:
Click on the <Device Search> button to re-search all the devices.
Then select the camera with the correct MAC address. Double click on
the camera, and the login window will come out.
Step 5:
Enter username and password to access the camera.
Installing DC Viewer Software Online
For initial access to the camera, a client program, DC Viewer, will be
automatically installed to the PC when connecting to the camera.
If the w
eb browser doesn’t allow DC Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
Appendix C: Setup Internet Security
) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser. Right
click on the Information Bar and select <
Install ActiveX Control…> to allow the
installation.